Things can get warm fast when your air conditioner won't turn on in San Antonio. Thankfully, Aramendia Plumbing, Heating and Air is here to help you remain cool, even when your AC isn't functioning properly. Here are eight potential reasons why your air conditioner won't turn on and how to fix them.
1) Check the Thermostat
The easiest explanation for your AC not turning on is a thermostat issue. Check to ensure your thermostat is on, set to "cool," and that the temperature is set to a few degrees lower than the normal ambient temperature of your home. You might also need to replace the batteries. If that doesn't solve the issue, the temperature sensor in the thermostat could be inaccurate. A thermostat that can't read the desired temperature could keep your air conditioner from turning on. Once you've discovered that the thermostat is faulty, it's time to replace it. If you can't decide on a thermostat that's right for your residence, consult with an Expert to help determine the best choice.
2) Check the Air Filter
Your air filter should be cleaned or replaced every 30-60 days at minimum. You should change them more often depending on the number of pets and people living in your home, in addition to the local air pollution levels surrounding your residence. A dirty air filter can restrict airflow, causing your air conditioner to freeze and not turn on.
If your air filter appears dirty or you can't remember the last time you changed it, it's time to install a new one. If your AC was frozen, wait for it to thaw after changing the filter before turning it back on.
3) Check the Circuit Breaker
Open the electrical panel inside your home and check to see if the circuit breaker connected to your air conditioner is tripped. You can identify if the breaker is tripped if the switch has moved to the "OFF" position. To resolve this issue, simply flip the breaker so that it's in the "ON" position.
If your AC continues to trip the breaker after correcting this issue, you might have a serious problem and should call the Experts at Aramendia Plumbing, Heating and Air to prevent it from damaging your home or air conditioner.
4) Check the Indoor Shutoff Switch
Often mistaken for a light switch, if your AC won't turn on, the indoor shutoff switch might have been flipped accidentally. These switches are often located near your furnace, in a closet, crawl space or attic. Once you find the shutoff switch, check to see if it's in the "OFF" position. If so, simply turn it back on. It's always a helpful idea to label this switch to prevent anyone from mistakenly switching it off.
5) Check the Outdoor Shutoff Switch
If you or someone else has recently repaired or maintained your air conditioner, they might have turned off the external shutoff switch as a safety precaution. First, find the external shutoff switch, which should be near your AC unit. If the switch is in the "OFF" position, just flip it to allow your air conditioner to turn on.
6) Find the AC's Reset Button
When your air conditioner won't turn on, it may simply need to be reset. Not all ACs have a reset button, so first verify if your unit does. If you can find the reset button, press it before attempting to turn your AC on again. If you can't locate the reset button, manually reset your air conditioner by shutting your thermostat off for five to 10 minutes before turning it back on again.
7) Inspect the AC for Ice Buildup
Look over the air conditioner for any ice buildup either on or inside the unit. If you discover ice on your machine, you need to wait for it to defrost before attempting to start the unit or you risk damaging the AC. Though there are various reasons you could see ice on your air conditioner, it's always best to call Aramendia Plumbing, Heating and Air for a consultation to prevent further damage from occurring.
8) Ensure the Condensate Drain Isn't Clogged
If you don't find ice on the air conditioner, the condensate drain could be backed up. When clogged, your AC won't turn on as a safety precaution. To resolve the issue, unclog the drain line with suction from a wet/dry vac. Test that you've resolved the blockage by pouring a small amount of clear water and watching it flow out. For serious clogs, it could be best to call the Experts.
AC Still Won't Turn On? Call Aramendia Plumbing, Heating and Air!
There's no reason to suffer without air conditioning—call your local HVAC Experts in San Antonio to help discover why your AC won't turn on. Our fully trained technicians can troubleshoot why your unit isn't working, and complete a repair or install a replacement. And with Aramendia Plumbing, Heating and Air, your satisfaction is guaranteed!*
Contact us at 866-397-3787 to schedule your air conditioning appointment in San Antonio today!