Is Puron R410a Being Phased Out?
Your AC system uses a chemical refrigerant to shift heat within your residence outside. This makes your home chilled and refreshing. The type of refrigerant used in residential air conditioner has been modified a few times over the years, following technological advancements and environmental regards.
All updated home AC equipment in the U.S. run on R410a, also referred to as Puron. But this refrigerant will subsequently no longer be made. This is a result of a continued concentration on reducing substances known to have an effect on the environment.
To find out the “why” behind cooling regulation, it’s useful to put it into perspective. Two-thirds of the 128.5 million residences in the USA have air conditioners, according to the U.S. Department of Energy.
But it’s not actually the air conditioning system itself, or even its cooling capabilities.
The main issue is the refrigerant these systems use to produce the cooling we enjoy.
Installed after 2010
If your equipment was installed after January 1, 2010, it probably uses R410a. And there’s an extended amount of time for you to prepare for the phaseout. So, it’s not something you should be concerned about at this time.
Strategies and timetables have been set for commercial AC equipment. But the start of the phaseout for residential cooling systems hasn’t yet been scheduled. However, the phaseout could start around 2024 and take 10 years to complete.
By then, you might need to replace your equipment regardless, since the ordinary life cycle for an AC system is typically 15 years.
Installed Before 2010
This refrigerant isn’t being made at this time, but there are still lots of the U.S. residential cooling systems using R22. If you have to have repairs, it could be very expensive as only recovered and recycled refrigerant is attainable.
In many cases, we recommend buying a new your unit because of the growing costs of maintaining an AC with R22. As a bonus, you’ll be getting a better energy-efficient system.
Call our Experts at phone now and we’ll help you begin finding a modern solution.
How Do I Find Out What Refrigerant My AC Uses?
If you’re not sure what variety of refrigerant your air conditioning runs on, you can look at its panel. This piece is typically located on the exterior condenser. Or you can check your owner’s manual.
If you still can’t come across it, the U.S. residents should contact us at phone and our Experts can assist you.
Why are Refrigerants Damaging to the Environment?
Older types of refrigerants can harm the planet and contribute to climate change. Here’s a brief look at the history of residential air conditioner refrigerants:
- Residential air conditioners have run with R22, or Freon, for many decades. Scientists determined it was harmful to the environment and ozone, so creation permanently ended on January 1, 2020.
- R410a is the substitute for R22. It’s what you’ll find in all new air conditioners today.
What Should I Do for Now?
If your AC is close to (or older than) 15 years, now’s a fantastic time to get started planning for installation.
We understand that buying a new system can be a considerable expense. That’s why we offer our exclusive Advantage Program™ plus financing, With our Advantage Program, you can receive an up-to-date, high-efficiency system for merely one small monthly payment. And get maintenance, repairs and parts at no additional price.*
Reach us at phone to schedule an appointment right away. We’ll review your budget and needs to help you select the right comfort solution for your house.